Medela’s Disposable Fluid Collection System supports the safe collection and disposal of suctioned fluids. It aims to simplify the handling of contaminated waste materials and simplify the setup of the suction pumps.
Safe and hygienic fluid waste management
All liners are equipped with multiple safety features such as an overflow and bacteria filter, a smoke pre-filter and a non-return valve to prevent back-flow.
The hard-top lid seals precisely and immediately enable operation at low noise levels.
Thanks to one single vacuum connection , no extra tubing needs to be connected with every liner exchange.
Safety by design
Optional solidifier models eliminate the risk of spilling and may reduce cost of disposal. (Depending on local disposal regulations).
Easy to scale
Setups with serial connection enables handling of large volumes up to 22 litres.
Easy to set up
The vacuum is immediately applied through the hard-top lids, which snap onto the jar easily and are a perfect fit.
Patient and Vacuum tubing
A wide range of patient suction tubings with or without fingertip, different connectors and sizes are available.
The Vacuum tubing is made from silicone with a choice of port connections.
Change-over valve with clamp holder
For suctioning large volumes of fluid. With manual switch from one liner or jar to the next.
Trolley
The stable base for an easy and space saving fluid collection set-up.
Filters
To protect from overflow, bacteria and to neutralise odours.
Serial connection
For suctioning large volumes of fluid. With automatic switch from one liner to the other.
Disposable specimen cup
To collect tissue samples.
Brochure Disposable Collection System DCS (pdf)
Instructions for use Disposable Collection System (pdf)
Quick card Disposable Collection System (pdf)
Instructions for use Trolley for Disposable Collection System (pdf)
Brochure on Virus/Bacteria/Overflow protection Filters (pdf)
Healthcare accessories catalogue (pdf)
Safe and hygienic fluid waste management
All liners are equipped with multiple safety features such as an overflow and bacteria filter, a smoke pre-filter and a non-return valve to prevent back-flow.
The hard-top lid seals precisely and immediately enable operation at low noise levels.
Thanks to one single vacuum connection , no extra tubing needs to be connected with every liner exchange.
Safety by design
Optional solidifier models eliminate the risk of spilling and may reduce cost of disposal. (Depending on local disposal regulations).
Easy to scale
Setups with serial connection enables handling of large volumes up to 22 litres.
Easy to set up
The vacuum is immediately applied through the hard-top lids, which snap onto the jar easily and are a perfect fit.
Patient and Vacuum tubing
A wide range of patient suction tubings with or without fingertip, different connectors and sizes are available.
The Vacuum tubing is made from silicone with a choice of port connections.
Change-over valve with clamp holder
For suctioning large volumes of fluid. With manual switch from one liner or jar to the next.
Trolley
The stable base for an easy and space saving fluid collection set-up.
Filters
To protect from overflow, bacteria and to neutralise odours.
Serial connection
For suctioning large volumes of fluid. With automatic switch from one liner to the other.
Disposable specimen cup
To collect tissue samples.
Brochure Disposable Collection System DCS (pdf)
Instructions for use Disposable Collection System (pdf)
Quick card Disposable Collection System (pdf)
Instructions for use Trolley for Disposable Collection System (pdf)
Brochure on Virus/Bacteria/Overflow protection Filters (pdf)
Healthcare accessories catalogue (pdf)
Articles that may be of interest