Can the ink used for printed dummies become a danger?
No, Medela Baby only uses food-safe inks that are completely harmless for babies, even if they would happen to scrape them off with their teeth.
Can dummies help relieve my baby when in pain?
There is scientific evidence that shows suckling on a dummy helps to reduce babies’ feelings of discomfort during a painful procedure.2 When your baby needs an immunisation or a blood sample taken, try to offer the soother during the procedure.
When your baby starts teething, suckling can help relieve the stress of the pain your little one feels but doesn't understand. However, if your baby starts to bite holes into the dummy, offer a teether to chew on instead. Teethers can be helpful to relieve some of the discomforts of gum pain.
Babies can experience pain when they have an ear infection. There has been some evidence that the use of a dummy could increase the risk of ear infections – acute otitis media (AOM). Suckling on a dummy may create a pressure difference which prevents fluid from draining through the tube that connects the middle ear to the back of the nose and throat. This could lead to a bacterial infection. If your baby has frequent ear infections, it’s therefore recommended to reduce or eliminate the use of a dummy beyond six months of age to help avoid a possible recurrence of AOM.3
When should my baby stop using the dummy?
Recommendations about when to stop using the dummy vary greatly. Many children stop using the soother on their own or when they start eating solid foods. Other children have very strong desires to suckle for a longer period of time. The American Academy of Pediatric Dentistry recommends that weaning from a dummy should start at the latest by 36 months.4
Download our ebook Parent guide for dummies’ to learn more about this journey and tips to help you go through weaning together.
What is the right way to clean my Medela Baby dummy?
1) To sterilise the soother you can:
1. Boil the dummy for 5 minutes in water. Allow it to cool thoroughly before giving it to your baby. If needed, squeeze out any water that may be left in the teat.
2. Steam sterilise the dummy in the microwave.
3. If you have a microwave steriliser, follow the instructions included by the manufacturer.
4. If a Medela Baby dummy Steribox is included with your dummy, please follow the instructions for use detailed here.
5. Use an electric steam steriliser. Follow the instructions of your device to correctly sterilise the dummy.
2) To clean a dummy: Wash the soother with warm water.
Additional tips for dummy safety and hygiene:
If the dummy falls on the floor, avoid putting it in your mouth to clean it. You could transfer bacteria and viruses to your baby.
Before each use, pull firmly on the teat and inspect it for tears or holes. Always replace the dummy at the first sign of wear or damage.
Replace dummies that are in daily use every 1–2 months.
Replace dummies immediately if your baby has had any infectious disease (e.g. a cold, stomach flu).
The protection cap and Steribox help keep the dummy clean when out and about.
Why do Medela Baby dummies have a valve?
Medela Baby ORIGINAL, DAY & NIGHT, and NEWBORN dummies have a valve to ensure optimal suckling comfort. Dummy teats made of silicone remain soft and elastic to make sure gums and teeth do not sense excessive resistance. Any residual water in the teat after sterilising or cleaning the dummy can be removed easily just by squeezing the teat.
Our SOFT SILICONE dummy teat is also soft and flexible. However, it doesn’t have or need a valve because it is formed in one single piece.
How does the ideal dummy look?
Requirements for dummies have been recommended by speech-language pathologists. The following features should be incorporated into a dummy’s design to help support the natural movement of the mouth muscles.5,7
Thin neck teat – minimises the space between the upper and lower jaw
Flat teat – takes up less space in the mouth allowing for more tongue movement
Flexible and elastic teat – allows for additional tongue movement
Lightweight – minimises the work of the facial muscles
Ergonomically shaped shield – fits the contour of the face and prevent pressure points
What are the SensoPearls™?
At Medela Baby we want our products to make every gesture more gentle, intimate and assured. Baby skin is sensitive and we strive to make all our products gentle to the skin. Sensopearls™ are smooth little nubs on the inside of the shield of all our dummies. They are placed on the top and bottom of the shield to reduce – in addition to the air holes – the risk of redness and irritation on your little one’s delicate skin.
Why do Medela Baby dummies have holes in the shield?
At Medela Baby we want our products to make every gesture more gentle, intimate and assured. Baby skin is sensitive and we strive to make all our products as gentle to your little one’s skin as possible. These holes together with our Sensopearls™ enhance airflow and avoid skin irritation increasing child safety.
Even in the unlikely event that your little one happens to get the whole dummy into their mouth, the holes will allow air to flow. It is important not to block these air holes, for instance by attaching cords or ribbons as it might limit airflow.
Is the dummy teat shape important?
The shape and features of a dummy are very important to help support the oral development of your baby when it is used with purpose and responsibility. Speech-language pathologists recommend that dummies should have a symmetrical shape with a thin shaft and a flat teat, which takes up less space in the mouth allowing for more tongue movement.5,7
Are Medela Baby dummies orthodontic?
All Medela baby dummy teats are orthodontic as they have been developed using criteria defined by speech-language pathologists.5,7 They have a symmetrical teat and a thin neck.
The thin neck teat allows lip contact and minimises the space between a baby’s upper and lower jaw.
A flat shaped teat that takes up less space and the flexible silicone allow for increased free movement of the tongue.
What is a symmetrical teat?
Symmetrical teat means the teat has the same shape on the upper and lower parts.
A dummy with a symmetrically formed teat is easily accepted, as it supports the natural physiological tongue, mouth and facial muscle movements and the natural palate growth during this period of development.
Does the teat size matter?
Yes. Our dummies are designed to fit the developmental growth stages of your baby. Your little one is growing the fastest in the first few years of life. The dummy teat length and width of the different sizes fit the average growth measurements of the oral cavity during these developmental periods: newborn 2 months, 0–6 months, 6–18 months and 18+ months.
The dummy should fulfill the purpose of calming your baby. When the teat size fits properly in the mouth, is not too big and not too small, this provides better support for the natural suckling movements.
What does ergonomic shield mean?
The Medela Baby shields were developed with an ergonomist and designed to fit children’s faces, preventing pressure points under the nose or on the chin and cheeks. Our angel-wing-shape design does not interfere with babies’ breathing and facilitates smelling the comforting scent of the mother. Its light weight minimises additional stress on the orofacial muscles.
The air holes and Sensopearls™ allow for movement of air around the face which helps reduce possibile redness or skin irritations.
Are Medela Baby dummies made without BPA?
Medela Baby dummies are made without BPA.
Bisphenol A (BPA) is a chemical component of polycarbonate (PC) plastics and is used in packaging and containers that come in contact with food products. It can also be used in the linings of canned foods and beverages and metal jar lids. Under certain circumstances, it can leach from the material.
This can occur when the container is used for heating food in the microwave, keeping food warm over long periods or when there are cracks, scratches, or damage to the material surface.
There are concerns about the influence of BPA on the hormone balance of infants and small children, which is why all Medela Baby dummies are made without BPA.
Are Medela Baby products made without BPS and plasticisers?
Medela Baby products do not contain BPS or plasticisers.
Bisphenol S (BPS) is similar to BPA. It is used in the production of plastic containers and can also be found in food and beverage can linings and various paper products. It appears to have the same health risks as BPA, with concerns about its influence on the hormone balance of infants and small children, which is why all Medela Baby soothers are free of BPS and BPA.
Plasticisers, also known as phthalates are used in polyvinyl chloride (PVC) plastics to improve the flexibility and durability of the material. This chemical can also leach out of the product. Some plasticisers have caused concerns about the influence on hormones in children and adults. That is why we specifically use only phthalate-free PVC in our products.
Are dummies bad for the teeth or can they cause misalignment of the teeth?
No, the limited and responsible use of a dummy should not cause problems with misaligned teeth. Dummy use should be limited to less than six hours per day.6 Choose a dummy shape that supports oral development, usually signalled by the word ‘orthodontic’.
Limiting the hours of daily use and early weaning from a dummy can help prevent misaligned teeth.4,6 Weaning a baby from a dummy can begin as early as 6 months.8 Each child’s mouth and teeth develop differently. The use of dummies for children older than 24 months should be a decision made by each parent, based on consultation with a medical or dental health care provider. At the latest, weaning should start by 36 months4,8 as recommended by pediatric dentists.
All Medela Baby dummies are orthodontic and designed to help support the natural movement of mouth muscles. Their shapes come with:5,7
Thin neck teat – minimises the space between the upper and lower jaw
Flat teat – takes up less space in the mouth allowing for more tongue movement
Flexible and elastic teat – allows for additional tongue movement
Lightweight – minimises the work of the facial muscles
Ergonomically shaped shield – to fit the contour of the face and prevent pressure points
How often should dummies be cleaned?
Before its first use, boil the dummy in hot water for 5 minutes. Allow it to cool thoroughly before giving it to your baby and squeeze out any residual water that may still be in the teat.
We recommend to clean the dummy by washing it with warm water before every use.
To ensure safety and good hygiene, sterilise the dummy if it is heavily soiled or you live in a country in which water may be unsafe.
Parents often decide to sterilise the dummy more frequently in the first 3 months of life of their baby.
How often should I replace the dummies?
We recommend to replace soothers that are in daily use every 1–2 months, to ensure a safe, hygienic condition of the soother and help prevent any bacterial contamination.
Before each use, pull firmly on the teat and inspect it for tears or holes. Always replace the soother at the first sign of wear or damage.
Replace dummies immediately after your little one has had any infectious disease (e.g. a cold, stomach flu).
How can I recycle the dummy?
Medela Baby packaging is recyclable, both the carton and the plastic blister and steribox are made of PP.
Our one-piece dummy, the Soft Silicone is fully made of silicone, it is not recyclable. Please dispose according to local regulations.
Our other dummies (Newborn, Original and Day & Night) are made of 2 materials (PP and silicone teat) that are ultrasonic welded and not detachable to ensure your baby safety. As they are not detachable, they are not recyclable.
